| Product | EOL Announced | Last Order | Last Date to Convert Warranty | Same Day Support Discontinued | Next Day Support Discontinued | End of Support |
|---|---|---|---|---|---|---|
| NSMXpress, NSM 3000 | 01/30/2015 | 07/31/2015 | 07/31/2016 | 07/31/2017 | 07/31/2019 | 07/31/2020 |
| NS-SM-A2-CM, NS-SM-A2-HA | 05/13/2014 | 10/31/2014 | 10/31/2015 | 10/31/2016 | 10/31/2018 | 10/31/2019 |
| NS-SM-A-BSE, NS-SM-A-CM, NS-SM-A-HA | 06/01/2010 | 11/29/2010 | 11/29/2011 | 11/29/2012 | 11/29/2014 | 11/29/2015 |
Junos Space is the next comprehensive network management solution that simplifies and automates management of Juniper’s switching, routing, and security devices. Junos Space Network Management Platform works with other management applications to deliver comprehensive management of Juniper devices including:
- Edge Services Director
- Security Director
- Services Activation Director
- Network Director
- Service Now
- Service Insight
- Content Director
- Virtual Director
1. Download space-14.1R2.9.ovaÂ
Download OVA file from Juniper Website (Click Here) with your account. Remember to choose Image for Virtual Appliance.2. In ESXi 5.5, Deploy OVA Template -> Choose downloaded ova file
3. Start Juniper JunOS Space in ESXi 5.5 and Complete basic configuration
3.1 User IDs
After you first time logged into Juniper Space with default account, you will be asked to change admin password right away.There are three different user IDs for Juniper JunOS Space as follows:
- admin user for CLI login  (default password: abc123)
- super user for WebUI (default password: juniper123)
- Maintenance user for maintenance operations. The password is set by the admin user during the initial configuration (that is, there is no default password).
3.2 Network Interfaces
By default, JunOS Space Virtual Appliance have four network interfaces:- eth0 - Â SSH and device management if eth3 is not configured (node IP). But Secure Shell Daemon (sshd) is listening on all IP addresses.
- eth0:0 - GUI interface with an instance of JBOSS running (GUI). The web GUI interface is only on the VIP, the same subnet as eth0.
- eth1 - Not supported before Junos Space Network Management Platform Release 14.1R1. From 14.1R1 onwards you can configure the eth1 Ethernet interface as an administrative interface.
- eth2 - Not supported
- eth3 - Device management when managed devices are on a subnet and not reachable by way of eth0. Device management, outbound (discover) and inbound (post-discovery), including syslog and DMI, should be eth3, or eth0 if eth3 is not configured.
Configure Eth0:
Configure Eth3 for Device Management  and configure eth0.0 for Web GUI:
Configuration Summary:
Eth0: 192.168.2.70 Â Gateway: 192.168.2.1 Â DNS: 8.8.8.8
Eth3: 172.17.3.70
Eth0.0 : 192.168.2.72
Note: Eth0.0 IP Address has to be in same network as Eth0.
3.3 Apply Settings
3.4 Web GUIÂ
3.5 SSH Session
SSH works on all Interfaces. Following output is SSH session on eth0 interface:Last login: Tue Aug 18 15:55:47 2015
Welcome to the Junos Space network settings utility.
Initializing, please wait
Junos Space Settings Menu
1> Change Password
2> Change Network Settings
3> Change Time Options
4> Retrieve Logs
5> Security
6> Expand VM Drive Size
7> (Debug) run shell
A> Apply changes
Q> Quit
R> Redraw Menu
Choice [1-7,AQR]: 7
[sudo] password for admin:Â
[root@space-005056920010 ~]# ifconfig
eth0    Link encap:Ethernet  HWaddr 00:50:56:92:00:10 Â
      inet addr:192.168.2.70  Bcast:192.168.2.255  Mask:255.255.255.0
     inet6 addr: fe80::250:56ff:fe92:10/64 Scope:Link
     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
     RX packets:13408 errors:0 dropped:0 overruns:0 frame:0
     TX packets:20862 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000Â
     RX bytes:2127342 (2.0 MiB)  TX bytes:18231701 (17.3 MiB)
eth0:0   Link encap:Ethernet  HWaddr 00:50:56:92:00:10 Â
      inet addr:192.168.2.72  Bcast:192.168.2.255  Mask:255.255.255.0   Â
     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
eth1    Link encap:Ethernet  HWaddr 00:50:56:92:00:11 Â
     inet6 addr: fe80::250:56ff:fe92:11/64 Scope:Link
     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
     RX packets:1134 errors:0 dropped:0 overruns:0 frame:0
     TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000Â
     RX bytes:87488 (85.4 KiB)  TX bytes:758 (758.0 b)
eth2    Link encap:Ethernet  HWaddr 00:50:56:92:00:12 Â
     inet6 addr: fe80::250:56ff:fe92:12/64 Scope:Link
     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
     RX packets:1100 errors:0 dropped:0 overruns:0 frame:0
     TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000Â
     RX bytes:85012 (83.0 KiB)  TX bytes:758 (758.0 b)
eth3    Link encap:Ethernet  HWaddr 00:50:56:92:00:13 Â
     inet6 addr: fe80::250:56ff:fe92:13/64 Scope:Link
     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
     RX packets:1071 errors:0 dropped:0 overruns:0 frame:0
     TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:1000Â
     RX bytes:83708 (81.7 KiB)  TX bytes:758 (758.0 b)
lo     Link encap:Local Loopback Â
     inet addr:127.0.0.1  Mask:255.0.0.0
     inet6 addr: ::1/128 Scope:Host
     UP LOOPBACK RUNNING  MTU:16436  Metric:1
     RX packets:3085894 errors:0 dropped:0 overruns:0 frame:0
     TX packets:3085894 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:0Â
     RX bytes:2317104090 (2.1 GiB)  TX bytes:2317104090 (2.1 GiB)
4. Log into Web UI
Before you are able to successfully see JunOS Space log in window, you may see a progress bar presenting you the process starting:
Web GUI only works on eth0.0 interface, which is ip 192.168.2.72, not on 192.168.2.70, although they are on same network. Default username and password is 'super' and 'juniper123'.
Reference:
1. Deploying a Junos Space Virtual Appliance2. Junos Space Virtual Appliance
3. Junos ® Space Virtual Appliance Deployment and Configuration Guide
No comments:
Post a Comment